SEYMAC Case Keyguard Designs

(link to SEYMAC case on Amazon)

Like all cases with screen protectors, there’s very little room between the inner edges of the screen protector and the edges of the screen.  This places limitations on what can be done with a keyguard as well as the mounting methods.  We’ve opted to use raised tabs as the mounting method for this case. 

To choose and download your keyguard design:

  1. Find your app in the first column.
  2. Find the layout for your app in the second column.
  3. You can get an idea what your keyguard will look like by clicking on the “image” link in that row.
  4. Click on the “STL” link to download your design.
  5. Once you’ve printed your design, look at the links at the bottom of the page for instructions on how to mount your keyguard.
AAC App Layout Approx. Print Cost & Time Mounting Method
slide-in tabs *** raised tabs raised tabs w/ magnets
P2G 6 x 10 $1.17
5h 1m		 STL / image STL / image STL
7 x 11 $1.08
4h 47m		 STL / image STL / image STL
Proloquo fixed $0.80
4h 13m		 STL / image STL / image STL
CoughDrop QC 60 $1.17
4h 56m		 STL / image STL / image STL
QC 112 $0.97
4h 24m		 STL / image STL / image STL
Grid for iPad SC 30 $1.09
4h 21m		 STL / image STL / image STL
SC 30
max rails*		 $1.88
6h 6m		 STL / image STL / image STL
SC 50 $1.16
4h 58m		 STL / image STL / image STL
Voco Chat $1.01
3h 48m		 STL / image STL / image STL
LWFL 7 x 12 $1.12
4h 58m		 STL / image STL / image STL
LWFL – VI** 7×12 $1.77
6h 27m		 STL / image STL / image STL
S4Y 8 x 15 $0.67
4h 0m		 STL / image STL / image STL
TD Snap 5 x 5
MP 30		 $0.74
3h 1m		 STL / image STL / image STL
5 x 5
MP 30 max rails		 $1.18
5h 14m		 STL / image STL / image STL
MP 66 $0.74
3h 1m		 STL / image STL / image STL
8 x 10 $1.05
4h 48m		 STL / image STL / image STL
TouchChat WP42 $1.21
4h 51m		 STL / image STL / image STL
WP42 (font size 72)  $1.21
4h 51m		 STL STL STL
WP60 $1.34
5h 26m		 STL / image STL / image STL
WP60 (font size 72) $1.34
5h 26m		 STL STL STL
WP80 $1.30
5h 38m		 STL / image STL / image STL
WP80 (font size 72) $1.30
5h 38m		 STL STL STL
WP108 $1.21
5h 27m		 STL / image STL / image STL
WP108 (font size 72) $1.21
5h 27m		 STL STL STL
WP108
(merged)		 $1.21
5h 27m		 STL / image STL / image STL
WP108 (merged) (font size 72) $1.21
5h 27m		 STL STL STL

* same as SC 30 layout, just with the rails as wide as possible and slightly taller
**  outer landmarks are implemented as bumps rather than horizontal and vertical ridges
***  The SEYMAC case comes with two screen protector frames.  One has a sheet of transparent plastic attached to the back while the other does not.  If using slide-in tabs to mount your keyguard, you should use the screen protector frame that does NOT have the transparent sheet attached.

Note that the “Approx. Print Cost & Time” figures below only apply if you are printing the keyguard for yourself.   When the case supports multiple mounting methods we’ve estimated the cost for the most expensive of the mounting methods. Note that we’ve had success printing keyguards using PLA filament with a 15% infill, two perimeters, and 4 top/bottom layers.  Print Costs assume a $20 roll of filament.  All keyguards with raised tabs should be printed with supports.

Mounting Your Keyguard

Refer to these pages based on your choice of mounting method for a description of how to mount your keyguard: