Accent systems are sold by PRC. A common practice among AAC vendors is to modify the tablet hardware to take advantage of greater functionality or better pricing from their supplier, all without changing the system model/version number. PRC did that with their Accent 1400-30 system. Around October 2020, they changed tablets to a 4K display but didn’t change the model name. There’s no easy way for you to determine which version of the Accent 1400-30 you have without contacting PRC or capturing a screenshot and determining the number of pixels. The older Accent 1400-30 screen is 2560 pixels by 1440 pixels. The newer tablet is 3840 pixels by 2160 pixels. We’ve used the identifier Accent 1400-30a to represent the older version and Accent 1400-30b to represent the newer version.
Accent 800-30 & Accent 800-40
The Accent 800 supports two different keyguard mounting methods:
 |
 |
| mounting method = No Mount | mounting method = Posts |
Make the following changes to the default Customizer settings:
---- Tablet ----
type_of_tablet = Accent 800-30
expose_home_button = no
expose_camera = no
---- Tablet Case ----
height_of_opening_in_case = 129
width_of_opening_in_case = 194
case_opening_corner_radius = 2
---- App Layout in px ---- bottom_of_upper_message_bar = 159 bottom_of_upper_command_bar = 263 top_of_lower_message_bar = 1200 top_of_lower_command_bar = 1200 ---- Bar Info ---- expose_upper_message_bar = yes bar_edge_slope = 30
---- Free-form and Hybrid Keyguard Openings ----
unit_of_measure_for_screen = mm
starting_corner_for_screen_measurements = lower-left
<... If mounting with posts, include the following changes ... >
---- Mounting Method ----
mounting_method = Posts
---- Posts Info ----
post_diameter = 3.8
post_length = 4
mount_to_top_of_opening_distance = 19
notch_in_post = no
add_mini_tabs = yes
mini_tab_length = 1.3
mini_tab_inset_distance = 15
mini_tab_height = 0
rotate_mini_tab = 2
Add the following instructions to your openings_and_additions.txt file:
screen_openings=[
[ 1, sw/2, -9.5, 14, 14, "crr", 90, 90, 90, 90, 2, ],
[ 3, sw/2+6.9, -12.5, 0, 0, "oa3", 90, 90, 90, 90, 4, ],
[ 2, sw/2-6.9, -12.5, 0, 0, "oa2", 90, 90, 90, 90, 4, ],
];
case_openings=[
[ 1, cow/2-5, coh-5, 25, 10, "rr", 90, 90, 90, 90, 2, ],
[ 1, cow/2-5, coh+3, 0, 0, "oa1", 90, 90, 90, 90, 5, ],
[ 1, cow/2+20, coh+3, 0, 0, "oa4", 90, 90, 90, 90, 5, ],
[ 1, cow-25, coh-5, 30, 10, "rr", 90, 90, 90, 90, 2, ],
[ 1, cow-25, coh+1.5, 0, 0, "oa1", 90, 90, 90, 90, 5, ],
[ 1, cow+.7, coh-5, 0, 0, "oa1", 90, 90, 90, 90, 5, ],
];
hgt = coh-cocr*2;
wdt = cow-cocr*2;
trim_hgt = (mounting_method == "Posts") ? 45.5 : -999;
case_additions=[
[ 1, cow/2, coh, wdt, 2, "cm1", 0, -999, -999, -999, -999, 0],
[ 3, cow/2, 0, wdt, 2, "cm3", 0, -999, -999, -999, -999, 0],
[ 2, cow, coh/2, 3, hgt, "cm2", 0, trim_hgt, -999, -999, -999, 0],
[ 4, 0, coh/2, 3, hgt, "cm4", 0, trim_hgt, -999, -999, -999, 0],
];
Accent 1000-20
Make the following changes to the default Customizer settings:
---- Tablet ----
type_of_tablet = Accent 1000-20
---- Tablet Case ----
height_of_opening_in_case = 157
width_of_opening_in_case = 237
case_opening_corner_radius = 2
---- App Layout in px ----
bottom_of_upper_message_bar = 106
bottom_of_upper_command_bar = 176
top_of_lower_message_bar = 800
top_of_lower_command_bar = 800
---- Bar Info ----
expose_upper_message_bar = yes
expose_upper_command_bar = yes
---- Grid Info ----
number_of_rows = 7
number_of_columns = 12
cell_height_in_mm = 13
cell_width_in_mm = 16
cell_corner_radius = 1
---- Grid Special Settings ----
top_padding = 1
---- Mounting Method ----
mounting_method = Posts
---- Posts Info ----
post_diameter = 3
post_length = 8
mount_to_top_of_opening_distance = 25
notch_in_post = no
add_mini_tabs = yes
mini_tab_width = 12
mini_tab_length = 3
mini_tab_inset_distance = 25
mini_tab_height = 0
rotate_mini_tab = 4
---- Free-form and Hybrid Keyguard Openings ----
unit_of_measure_for_screen = mm
---- Special Actions and Settings ----
keyguard_edge_chamfer = 0.7
cell_edge_chamfer = 0.8
Add the following instructions to your openings_and_additions.txt file:
case_openings=[
[ 1, cow/2, -2, 30, 20, "hd", 90, 90, 90, 90, 0, ],
[ 2, cow/2-14.81, -3.9, 0, 0, "oa2", 90, 90, 90, 90, 2, ],
[ 3, cow/2+14.81, -3.9, 0, 0, "oa3", 90, 90, 90, 90, 2, ],
];
case_additions=[
[ 1, cow, coh/2, 4.5, coh-cocr*2, "cm2", 0, 53.5, -999, -999, -999, 0],
[ 2, 0, coh/2, 4.5, coh-cocr*2, "cm4", 0, 53.5, -999, -999, -999, 0],
[ 3, cow/2, 0, cow-cocr*2, 4, "cm3", 0, -999, -999, -999, -999, 0],
];
Accent 1000-30 & Accent 1000-40
Make the following changes to the default Customizer settings:
---- Tablet ----
type_of_tablet = Accent 1000-30
---- Tablet Case ----
height_of_opening_in_case = 159
width_of_opening_in_case = 239
case_opening_corner_radius = 2
---- App Layout in px ----
bottom_of_upper_message_bar = 160
bottom_of_upper_command_bar = 264
top_of_lower_message_bar = 1200
top_of_lower_command_bar = 1200
---- Grid Info ----
number_of_rows = 7
number_of_columns = 12
cell_height_in_mm = 13
cell_width_in_mm = 16
cell_corner_radius = 1
---- Grid Special Settings ----
top_padding = 1
---- Free-form and Hybrid Keyguard Openings ----
unit_of_measure_for_screen = mm
---- Special Actions and Settings ----
keyguard_edge_chamfer = 0.7
cell_edge_chamfer = 0.8
And put the following instructions in the openings_and_additions.txt file:
screen_openings=[
[ 1, sw-5, -5, 20, 10, "rr", 90, 90, 90, 90, 2, ],
[ 1, sw-4.95, -12.7, 0, 0, "oa1", 90, 90, 90, 90, 2, ],
[ 1, sw+11.8, -5, 0, 0, "oa1", 90, 90, 90, 90, 2, ],
[ 1, -8, ucbb, sw+16, umbh+ucbh, "rr", 90, 90, 90, 90, 1, ],
];
case_openings=[
[ 1, cow/2, -2, 30, 20, "hd", 90, 90, 90, 90, 0, ],
[ 2, cow/2-14.81, -3.9, 0, 0, "oa2", 90, 90, 90, 90, 2, ],
[ 2, cow/2+14.81, -3.9, 0, 0, "oa3", 90, 90, 90, 90, 2, ],
];
case_additions=[
[ 1, 239, 79.5, 4.5, 155, "cm2", 0, -999, -999, -999, -999, 0],
[ 2, 0, 79.5, 4.5, 155, "cm4", 0, -999, -999, -999, -999, 0],
[ 3, 119.5, 159, 235, 4, "cm1", 0, -999, -999, -999, -999, 0],
[ 4, 119.5, 0, 235, 4, "cm3", 0, -999, -999, -999, -999, 0],
];
Accent 1400-20
---- Tablet ----
type_of_tablet = Accent 1400-20
---- Tablet Case ----
height_of_opening_in_case = 188
width_of_opening_in_case = 316
case_opening_corner_radius = 4
---- App Layout in mm ---- upper_message_bar_height = 30 upper_command_bar_height = 16 ---- Bar Info ---- expose_upper_message_bar = yes
case_openings=[ [ 1, 0, 0, 0, 0, r, 90, 90, 90, 90, 0, ], [ 2, 158, 199, 3, 3, ""c, 45, 90, 90, 90, 0, ], [ 3, 0, 0, 0, 0, "hd", 90, 90, 90, 90, 0, ], [ 4, 0, 0, 0, 0, "rr", 90, 90, 90, 90, 0, ] ]; case_additions=[ [ 1, 0, 94, 3.5, 181, "cm4", 0, -999, -999, -999, -999, 0, ], [ 2, 316, 94, 3.5, 181, "cm2", 0, -999, -999, -999, -999, 0, ], [ 3, 158, 0, 13, 6, "rr3", 0, -999, -999, -999, -999, 6, ], [ 4, 206, 0, 12, 13, "r3", 0, -999, -999, -999, -999, 0, ], [ 5, 110, 0, 12, 13, "r3", 0, -999, -999, -999, -999, 0, ], [ 6, 104, 0, 13, 0, "f3", 0, -999, -999, -999, -999, 0, ], [ 7, 116, 0, 13, 0, "f2", 0, -999, -999, -999, -999, 0, ], [ 8, 200, 0, 13, 0, "f3", 0, -999, -999, -999, -999, 0, ], [ 9, 212, 0, 13, 0, "f2", 0, -999, -999, -999, -999, 0, ], [10, 158, 188, 102, 14, "r1", 0, -999, -999, -999, -999, 0, ], [11, 215, 188, 12, 19, "r1", 0, -999, -999, -999, -999, 0, ], [12, 101, 188, 12, 19, "r1", 0, -999, -999, -999, -999, 0, ], [13, 95, 188, 6, 0, "f4", 0, -999, -999, -999, -999, 0, ], [14, 221, 188, 6, 0, "f1", 0, -999, -999, -999, -999, 0, ], [15, 209, 202, 5, 0, "f4", 0, -999, -999, -999, -999, 0, ], [16, 107, 202, 5, 0, "f1", 0, -999, -999, -999, -999, 0, ] ];
Accent 1400-30a
If you have an Accent 1400-30a (the original version) and are willing to provide some dimension information, please let us know.
Accent 1400-30b
Here are some Customizer settings that should work for you when creating a keyguard for the Accent 1400-30b when mounting it with posts:
---- Type of Keyguard ---- keyguard_thickness = 3 ---- Tablet ---- type_of_tablet = Accent 1400-30b ---- Tablet Case ---- height_of_opening_in_case = 185 width_of_opening_in_case = 316 case_opening_corner_radius = 2 ---- App Layout in px ---- bottom_of_upper_message_bar = 342 bottom_of_upper_command_bar = 521 top_of_lower_message_bar = 2160 top_of_lower_command_bar = 2160 ---- App Layout in mm ---- upper_message_bar_height = 30 upper_command_bar_height = 16 ---- Bar Info ---- expose_upper_message_bar = yes expose_upper_command_bar = yes vertical_rail_width = 7 ---- Grid Special Settings ---- left_padding = 1 right_padding = 1 ---- Mounting Method ---- mounting_method = Posts ---- Posts Info ---- post_diameter = 3 post_length = 8 mount_to_top_of_opening_distance = 32 notch_in_post = no
And here are the instructions to add to your openings_and_additions.txt file:
case_openings=[ [ 1, 0, 0, 0, 0, "r", 90, 90, 90, 90, 0, ], [ 2, 158, 199, 3, 3, "c", 45, 90, 90, 90, 0, ], [ 3, 0, 0, 0, 0, "hd", 90, 90, 90, 90, 0, ], [ 4, 0, 0, 0, 0, "rr", 90, 90, 90, 90, 0, ] ]; case_additions=[ [ 1, 0, 94, 3.5, 181, "cm4", 0, -999, -999, -999, -999, 0, ], [ 1, 316, 94, 3.5, 181, "cm2", 0, -999, -999, -999, -999, 0, ], [ 1, 158, 0, 13, 6, "rr3", 0, -999, -999, -999, -999, 6, ], [ 1, 206, 0, 12, 13, "r3", 0, -999, -999, -999, -999, 0, ], [ 1, 110, 0, 12, 13, "r3", 0, -999, -999, -999, -999, 0, ], [ 1, 104, 0, 13, 0, "f3", 0, -999, -999, -999, -999, 0, ], [ 1, 116, 0, 13, 0, "f2", 0, -999, -999, -999, -999, 0, ], [ 1, 200, 0, 13, 0, "f3", 0, -999, -999, -999, -999, 0, ], [ 1, 212, 0, 13, 0, "f2", 0, -999, -999, -999, -999, 0, ], [ 1, 158, 188, 102, 14, "r1", 0, -999, -999, -999, -999, 0, ], [ 1, 215, 188, 12, 19, "r1", 0, -999, -999, -999, -999, 0, ], [ 1, 101, 188, 12, 19, "r1", 0, -999, -999, -999, -999, 0, ], [ 1, 95, 188, 6, 0, "f4", 0, -999, -999, -999, -999, 0, ], [ 1, 221, 188, 6, 0, "f1", 0, -999, -999, -999, -999, 0, ], [ 1, 209, 202, 5, 0, "f4", 0, -999, -999, -999, -999, 0, ], [ 1, 107, 202, 5, 0, "f1", 0, -999, -999, -999, -999, 0, ] ];