(link to LTROP case on Amazon)
We’ve provided designs for two different methods for mounting your keyguard: slide-in tabs, or micro-suction tape.
To choose and download your keyguard design:
- Find your app in the first column.
- Find the layout for your app in the second column.
- Staying in the same row, choose a mounting method from the last two columns. You can get an idea what your keyguard will look like by clicking on the “image” links in that row.
- Right click on the “SVG” link and choose “save link as” to download your design.
- Once you’ve laser-cut your design, look at the links at the bottom of the page for instructions on how to mount your keyguard.
| AAC App |
Layout |
Mounting Method |
|
| slide-in tabs | micro-suction tape | ||
| P2G | 6 x 10 | SVG / image | SVG / image |
| 7 x 11 | SVG / image | SVG / image | |
| CoughDrop | QC 60 | SVG / image | SVG / image |
| QC 112 | SVG / image | SVG / image | |
| Grid for iPad | SC 30 | SVG / image | SVG / image |
| SC 30 max rails* |
SVG / image | SVG / image | |
| SC 50 | SVG / image | SVG / image | |
| Voco Chat | SVG / image | SVG / image | |
| LWFL | 7 x 12 | SVG / image | SVG / image |
| S4Y | 8 x 15 | SVG / image | SVG / image |
| TD Snap | 5 x 5 MP 30 |
SVG / image | SVG / image |
| 5 x 5 MP 30 max rails |
SVG / image | SVG / image | |
| MP 66 | SVG / image | SVG / image | |
| 8 x 10 | SVG / image | SVG / image | |
| TouchChat | WP42 | SVG / image | SVG / image |
| WP42 (font size 72) | SVG | SVG | |
| WP60 | SVG / image | SVG / image | |
| WP60 (font size 72) | SVG | SVG | |
| WP80 | SVG / image | SVG / image | |
| WP80 (font size 72) | SVG | SVG | |
| WP108 | SVG / image | SVG / image | |
| WP108 (font size 72) | SVG | SVG | |
| WP108 (merged) |
SVG / image | SVG / image | |
| WP108 (merged) (font size 72) |
SVG | SVG | |
* same as SC 30 layout, just with the rails as wide as possible
Mounting Your Keyguard
Refer to these pages based on your choice of mounting method for a description of how to mount your keyguard:
Printing a Stand
We’ve created a designer for a 3D-printable stand, for cases like this, that will allow you to position your tablet in a stable upright position.
We’ve also created a set of three stand designs specifically for the LTROP case that you can download and print. You’ll also need to download and 3D-print the stand plate that will go inside your case. Go here to learn how to prepare the stand and mount it to your case. You’ll also learn how to choose a preferred tablet angle.
Preferred tablet angle:
The stand will require two, 3/8-inch Chicago screws to attach to the LTROP case (and its various copycats).