(link to Fintie case on Amazon)
The Fintie Case has a large opening and can accommodate larger keyguards and has a built-in ring stand which can be easily used by children. The keyguards can be mounted using either slide-in tabs or micro-suction tape.
The keyguards can be mounted using either slide-in tabs or micro-suction tape.
To choose and download your keyguard design:
- Find your app in the first column.
- Find the layout for your app in the second column.
- Staying in the same row, choose a mounting method from the last two columns. You can get an idea what your keyguard will look like by clicking on the “image” links in that row.
- Click on the “STL” link to download your design.
- Once you’ve printed your design, look at the links at the bottom of the page for instructions on how to mount your keyguard.
| AAC App | Layout | Approx. Print Cost & Time | Mounting Method | |
| slide-in tabs | micro-suction tape | |||
| P2G | 6 x 10 | $1.31 6h 6m |
STL / image | STL / image |
| 7 x 11 | $1.18 5h 40m |
STL / image | STL / image | |
| Proloquo | fixed | $1.19 5h 33m |
STL / image | STL / image |
| CoughDrop | QC 60 | $1.15 5h 29m |
STL / image | STL / image |
| QC 112 | $1.35 6h 44m |
STL / image | STL / image | |
| Grid for iPad | SC 30 | $1.07 4h 50m |
STL / image | STL / image |
| SC 30 max rails* |
$1.71 6h 41m |
STL / image | STL / image | |
| SC 50 | $1.13 5h 28m |
STL / image | STL / image | |
| Voco Chat | $1.01 4h 17m |
STL / image | STL / image | |
| LWFL | 7 x 12 | $1.43 5h 36m |
STL / image | STL / image |
| LWFL – VI | 7 x 12 | $1.64 6h 55m |
STL / image | STL / image |
| S4Y | 8 x 15 | $1.15 6h 0m |
STL / image | STL / image |
| TD Snap | 5 x 5 MP 30 |
$1.08 4h 0m |
STL / image | STL / image |
| 5 x 5 MP 30 max rails |
$1.56 6h 34m |
STL / image | STL / image | |
| MP 66 | $1.08 4h 0m |
STL / image | STL / image | |
| 8 x 10 | $1.25 6h 19m |
STL / image | STL / image | |
| TouchChat | WP42 | $1.29 5h 57m |
STL / image | STL / image |
| WP42 (font size 72) | $1.29 5h 57m |
STL / image | STL / image | |
| WP60 | $1.29 5h 57m |
STL / image | STL / image | |
| WP60 (font size 72) | $1.29 5h 57m |
STL / image | STL / image | |
| WP80 | $1.26 6h 11m |
STL / image | STL / image | |
| WP80 (font size 72) | $1.26 6h 11m |
STL / image | STL / image | |
| WP108 | $1.49 5h 15m |
STL / image | STL / image | |
| WP108 (font size 72) | $1.49 5h 15m |
STL / image | STL / image | |
| WP108 (merged) |
$1.34 6h 36m |
STL / image | STL / image | |
| WP108 (merged) (font size 72) |
$1.34 6h 36m |
STL/image | STL / image | |
* same as SC 30 layout, just with the rails as wide as possible and slightly taller
Note that the “Approx. Print Cost & Time” figures below only apply if you are printing the keyguard for yourself. When the case supports multiple mounting methods we’ve estimated the cost for the most expensive of the mounting methods. Note that we’ve had success printing keyguards using PLA filament with a 15% infill, two perimeters, and 4 top/bottom layers. Print Costs assume a $20 roll of filament. All keyguards with raised tabs should be printed with supports.
Mounting Your Keyguard
Refer to these pages based on your choice of mounting method for a description of how to mount your keyguard: