(link to SUPCASE case on Amazon)
The SUPCASE Unicorn Beetle case, like the Andnary case, is wonderful but not friendly to keyguards. The keyguard must be inserted behind the screen protector and assembled “into” the case. One complication is that the screen protector has a plastic sheet that stretches across the opening. This plastic sheet must first be removed by heating up the adhesive with a hair dryer. See the video below for an example of the process.
If you need a plastic barrier on top of the screen, you can add a clear plastic sheet to the back of your keyguard. The process is described here.
Example keyguard:
To choose and download your keyguard design:
- Find your app in the first column.
- Find the layout for your app in the second column.
- Staying in the same row, click the “STL” link to download your design.
- Once you’ve printed your design, watch the video at the bottom of the page for instructions on mounting your keyguard.
| AAC App | Layout | Mounting Method |
| shelf | ||
| P2G | 6 x 10 | STL |
| 7 x 11 | STL | |
| Proloquo | fixed | If you can obtain a screenshot of this configuration, please contact us. |
| CoughDrop | QC 60 | STL |
| QC 112 | STL | |
| Grid for iPad | SC 30 | STL |
| SC 50 | STL | |
| Voco Chat | STL | |
| LWFL | 7 x 12 | STL |
| LWFL – VI | 7×12 | STL |
| S4Y | 8 x 15 | If you can obtain a screenshot of this configuration, please contact us. |
| TD Snap | 5 x 5 MP 30 |
STL |
| MP 66 | STL | |
| 8 x 10 | STL | |
| TouchChat | WP42 | STL |
| WP60 | STL | |
| WP80 | STL | |
| WP108 | STL |
Mounting Your Keyguard
First, remove the clear plastic sheet from the screen protector. This video demonstrates how.
This next video shows how to mount your keyguard in the Unicorn Beetle case.