(link to LTROP case with screen protector on Amazon)
We’ve provided designs for two different methods for mounting your keyguard: a keyguard with a shelf or a keyguard with a keyguard frame. In both instances, you will replace the screen protector that came with the case and use micro-suction tape to attach the keyguard or frame to the tablet before insertion into the case.
 |
 |
| keyguard | keyguard with frame |
If you go with a keyguard frame, the frame is printed separately from the keyguard. All keyguards in that column will snap into and out of the keyguard frame.
You can also add clear plastic to the back of the keyguard or keyguard frame to replicate the benefits of a screen protector.
To choose and download your keyguard design:
- Find your app in the first column.
- Find the layout for your app in the second column.
- Staying in the same row, choose a mounting method from the last two columns.
- Click on the “STL” link to download your design.
- If you’ve chosen a keyguard design from the “keyguard frame” column, find the line of keyguard frame design at the bottom of the table. Click on the “STL” link.
- Once you’ve printed your design, look at the links at the bottom of the page for instructions on how to mount your keyguard.
| AAC App |
Layout |
Mounting Method |
|
| shelf | keyguard frame*** | ||
| P2G | 6 x 10 | STL | Not Possible |
| 7 x 11 | STL | Not Possible | |
| Proloquo | fixed | STL | STL |
| CoughDrop | QC 60 | STL | STL |
| QC 112 | STL | STL | |
| Grid for iPad | SC 30 | STL | STL |
| SC 30 max rails* |
STL | STL | |
| SC 50 | STL | STL | |
| Voco Chat | STL | STL | |
| LWFL | 7 x 12 | STL | STL |
| LWFL – VI | 7 x 12 | STL | Not Possible |
| S4Y | 8 x 15 | STL | STL |
| TD Snap | 5 x 5 MP 30 | STL | STL |
| 5 x 5 MP 30 max rails |
STL | STL | |
| MP 66 | STL | STL | |
| 8 x 10 | STL | STL | |
| TouchChat | WP42 | STL | STL |
| WP42 (font size 72) | STL | STL | |
| WP60 | STL | STL | |
| WP60 (font size 72) | STL | STL | |
| WP80 | STL | STL | |
| WP80 (font size 72) | STL | STL | |
| WP108 | STL | STL | |
| WP108 (font size 72) | STL | STL | |
| WP108 (merged) | STL | STL | |
| WP108 (merged) (font size 72) |
STL | STL | |
* same as SC 30 layout, just with the rails as wide as possible and slightly taller
*** keyguard frame: STL
Mounting Your Keyguard
This video shows how to mount a keyguard in the LTROP with a screen protector case.
Printing a Stand
We’ve created a designer for a 3D-printable stand, for cases like this, that will allow you to position your tablet in a stable, upright position.
We’ve also created a set of three stand designs specifically for the LTROP case that you can download and print. You’ll also need to download and 3D-print the stand plate that will go inside your case. Go here to learn how to prepare the stand and mount it to your case. You’ll also learn how to choose a preferred tablet angle.
Preferred tablet angle:
The stand will require two, 3/8-inch Chicago screws to attach to the LTROP case (and its various copycats).