(link to Fintie case on Amazon)
This case can accept a standard keyguard mounted using slide-in tabs. Unfortunately, there is insufficient plastic to mount the keyguard using micro-suction tape.
As with the other cases of this style, the handle/stand is limited in how it can be angled and is unstable in the upright position. (We’ve created a designer for a 3D-printable stand, for cases like this, that will allow you to position your tablet in a stable, upright position. Go here to learn more.)
Example keyguard:
To choose and download your keyguard design:
- Find your app in the first column.
- Find the layout for your app in the second column.
- Staying in the same row, click the “STL” link to download your design.
- Once you’ve printed your design, watch the video at the bottom of the page for instructions on mounting your keyguard.
| AAC App | Layout | Mounting Method |
| slide-in tabs | ||
| P2G | 6 x 10 | STL |
| 7 x 11 | STL | |
| Proloquo | fixed | STL |
| CoughDrop | QC 60 | STL |
| QC 112 | STL | |
| Grid for iPad | SC 30 | STL |
| SC 50 | STL | |
| Voco Chat | STL | |
| LWFL | 7 x 12 | STL |
| LWFL – VI | 7 x 12 | STL |
| S4Y | 8 x 15 | STL |
| TD Snap | 5 x 5 MP 30 |
STL |
| MP 66 | STL | |
| 8 x 10 | STL | |
| TouchChat | WP42 | STL |
| WP60 | STL | |
| WP80 | STL | |
| WP108 | STL |
Mounting Your Keyguard
This video shows how to mount a keyguard in the Andnary case.
Note that the cut for the camera in the case may be off-center while the opening in the keyguard is centered. This won’t affect the functioning of the camera or the nearby ambient light sensor.