18 Aug 2024 (Version 65): Updated Accent 1400-30a data based on pixel count information from PRC. Added support for the Accent 1000-20. Fixed bug when there’s an uneven case opening and the keyguard thickness exceeds the rail height. Fixed bug associated with ALS locations when tablet is oriented in portrait mode. Added support for engraving/embossing text from within the Customizer. Exposed the default left and bottom case opening values to make it easier to determine the unequal left/bottom of case value. Added support for a ridge that can be rotated at any angle, not just horizontal and vertical. Added support for customization of the slope (chamfer) around the edge of the keyguard. Added support for customization of the slope (chamfer) at the top edge of a cell (also affects the chamfer on bars). Added support for r/rr/c/hd cuts that don’t go all the way through the keyguard by putting a number in the “other” column. Fixed bug that prevented using home button edge slope with keyguard frames.
Update 30 June 2024 (Version 64): Distinguished between two different Accent 1400-30 tablets that impacts their pixel count differences.
Update 8 June 2024 (Version 63): Cleaned up some artifacts that appear with manual ridge arcs when the ridge thickness is set to larger than 7 mm. Added minimal support for all 23 Samsung tablets introduced since 2020 (support doesn’t include openings for cameras or buttons on the face of the tablet). Changed naming of Accent tablets to match what appears on the PRC website. Added an entry for Grid Pad 11. Fixed bugs when adding symmetric home button and camera openings. Corrected the data for the Accent 1400-30. Fixed bug that allowed laser-cut keyguards to have cells with non-90 degree top and bottom slopes. Fixed bug that allowed the keyguard shelf to be thicker than the keyguard itself. Fixed bug that allowed cell inserts to be created via laser-cutting. Fixed bug that allowed the mini tabs for post mounting to be higher than the thickness of the keyguard.
Update 17 May2024 (Version 62): Fixed how “preferred rail height” is reported when generating Customizer Settings. Fixed bug with recurved edges of slide-in tabs with a length value less than 3 mm. Rested horizontal and vertical ridges on the bottom of the keyguard and adjust the total height to match. Added a ridge arc to support manual ridges around merged cells. Added cell_width (cw), cell_height (ch), and cell corner radius (ccr) to the variables that can be used in the openings_and_additions.txt file. Added height_of_ridge (hor) and thickness_of_ridge (tor) for use in the openings_and_additions.txt file. Fixed the double-entry of NovaChat 8.5 in the “type of tablet” pull-down list in the Customizer. Fixed the values for the Posts Info section when generating Customizer Settings. Added support for the iPad Pro 11-inch (M4), iPad Pro 13-inch (M4), iPad Air 11-inch (M2), and iPad Air 13-inch (M2). Fixed a bug where a groove appeared in the bar region even if the associated bar was of zero height. Fixed some bugs with the creation of posts. Fixed the camera location on the earlier iPad Pros.